background image

Instruction Manual 

Hydraulic Punch Driver 902-482 

Due to continuing improvements, actual product may differ 

 slightly from the product described herein. 

Read this material before using this product.

 

Failure to do so can result in serious injury. 

SAVE THIS MANUAL 

LIMITED 1 YEAR WARRANTY 

We make every effort to assure that its products meet high quality and durability standards, 

and warrants to the original purchaser that this product is free from defects in materials 

and workmanship for the period of one year from the date of purchase  (90 days if used 

as rental equipment). This warranty does not apply to damage due directly or indirectly, to 

misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, normal 

wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries 

to persons or property, or for incidental, contingent, special or consequential damages 

arising from the use of our product. Some states do not allow the exclusion or limitation of 

incidental or consequential damages, so the above limitation of exclusion may not apply to 

you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, 

EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY 

AND FITNESS. 

To take advantage of this warranty, the product or part must be returned to Eclipse  with 

transportation charges prepaid. Proof of purchase date and an explanation of the complaint 

must accompany the merchandise. If our inspection verifies the defect, we will either 

repair or replace the product at our election or we may elect to refund the purchase price if 

we cannot readily and quickly provide you with a replacement. We will return repaired 

products at our expense, but if we determine there is no defect, or that the defect resulted 

from causes not within the scope of our warranty, then you must bear the cost of returning 

the product.   

The warranty gives you specific legal rights and you may also have other rights which 

vary from place to place. 

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com 

Содержание 902-482








Отзывы: