EC-PM-530B User's Manual
- 48 -
7. If you need to set several parameters, please refer to the previous point and set the parameters one
by one.
8. After finishing setting, click “Set” to exit the “Properties” window.
9. Restart the printer and the new settings take effect.
3.2.3 Menu Terms Descriptions
Terms
Description
Black Mark
After selecting this function on, printer would carry out black mark detection
instruction so as to make the vertical positioning printing precisely. (Bills or
papers should have black mark on the printed side.)
Print Dir
Set the print direction: bidirectional or unidirectional
Form Width
Select the bill width.
Cutter
When the setting of the cutter is valid, the printer can execute the paper-cut
instruction to cut paper.
Baud Rate
Select the printer serial data transfer rate.
Data Bits
Select the serial data bits.
Protocol
Select the control way of serial data transfer protocol as software control
(XON/XOFF) or hardware control (DTR).
Parity
Select the parity bit for serial data transfer.
Stop Bits
Select the serial data transfer stop bit.
Partial Cut Set
Set the paper-cut width in the partial cut mode, the paper-cut width is bigger
while the value is higher.
EC Electronics, Ltd.
www.eclinepos.com
EC Electronics, Ltd
No. 221 Wai Yip Street, Kwun Tong
Kowloon, Hong Kong
TEL : (852) 3590 6397
FAX : (852) 3590 6497
E-MAIL : [email protected]
Содержание EC-PM-530B Series
Страница 1: ...User s Manual EC PM 530B Series Printer...
