manualshive.com logo in svg

EcLine EC-PM-530B Series, Руководство пользователя

Поделиться
Скачать
EcLine EC-PM-530B Series Скачать руководство пользователя страница 52

EC-PM-530B User's Manual

 

- 45 - 

■ 

Alignment Adjust Mode

 

While pressing the 

FEED

 button and holding on, turn on the printer. The printer beeps three times, 

and then you should loosen the 

FEED

 button. The printer will enter the alignment adjust mode.

 

Each press on the 

FEED

 button will add 1 to the BID value. If you select BID 08, press 

FEED

 button 

for 8 times, and then press this button for a long time, the settings will be saved after the printer 
beeps twice, and the currently selected value will be printed at the same time. Turn off the printer; 
the new value will take effect after the printer is restarted.

 

 
 
 
 
 

■ 

Hex Dump Mode

 

While pressing the 

FEED 

button and holding on, turn on the printer. The printer beeps four times, 

and then you should loosen the 

FEED

 button. The printer will enter the Hexadecimal Printing Mode.

 

 

3.2.2 Parameter Settings 

EC-PM-530B supports the function of parameter settings, which can be set in the PC with the driver 
installed in.

 

The concrete setting steps are shown as follows:

 

1. Make sure that the computer and the printer are connected with an USB cable and both the 

computer and the printer are turned on, the printer should be in normal working condition as well.

 

2. Under the operation system of WIN 2000/WIN XP/VISTA/WIN 7, Click “Start” 

→

 “Settings” 

→

 

“Printers”.

 

Under the operation system of Windows 8, click “Desktop” in the main panel firstly, and then double 
click and enter into the window of “Control panel”, click “Hardware and Sound” to find “Devices and 
printers”, and open the window of “Devices and printers”. 

 

3. Right click the driver of this printer in the window of “Printers”, and then select “Properties”. 

4. Then a window of “Properties” pops up, click “Printer Settings” and open the window of “Printer 

Settings”.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Note: Alignment adjustment will affect print quality. You must think it over before adjusting 

and must operate it strictly according to the instruction.

 

EC Electronics, Ltd.

www.eclinepos.com

EC Electronics, Ltd 

No. 221 Wai Yip Street, Kwun Tong 

Kowloon, Hong Kong

TEL : (852) 3590 6397 

FAX : (852) 3590 6497 

E-MAIL : [email protected]

Содержание EC-PM-530B Series




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды