7
PANEL DESCRIPTIONS
6.1. Front Panel
1.
LINK LED
: The LED illuminates green when the transmitter is successfully
connected to the receiver by a CATx cable.
2.
HDCP LED:
a.
The LED illuminates green
when the HDMI signal is transmitted with
HDCP.
b.
The LED blinks green
when the HDMI signal is transmitted without HDCP.
c.
The LED turns off
when there is no HDMI signal input.
3.
RESET
: Press the recessed button to reboot this unit.
4.
POWER LED
: The LED illuminates red when power is applied.
5.
IR
: Built-in IR sensor for IR learning feature or IR pass-through control.
6.
HDMI IN 1 LED
: The LED illuminates orange when the HDMI IN 1 port is
connected to a source device, and it will turn green once the device is selected as
input source.
7.
HDMI IN 1
: Type-A HDMI port to connect HDMI source.
8.
HDMI IN 2 LED
: The LED illuminates orange when the HDMI IN 2 port is
connected to a source device, and it will turn green once the device is selected as
input source.
9.
HDMI IN 2
: Type-A HDMI port to connect HDMI source.
10.
FIRMWARE
: USB-C port for firmware upgrade.
11.
USB-C
: Type-C USB to connect the Macbook or other device with USB-C output.
