18
7.5 Video Wall
When the VEO-XTI2L and VEO-XRI2L are used as a video wall composer, both
Transmitters and Receivers need to be configured as multicast devices. Each Receiver
must be set on the same Transmitter ID Group, following the instructions available on
chapter 8 and 9 of this manual.
The number of VEO Transmitter can’t exceed the number of 253 units. In a
class B Network, the total number of VEO devices (Transmitter and Receivers)
can’t exceed the number of 65K units.
Please avoid connecting or disconnecting HDMI cables while the VEO devices
are powered on!
9.
PC UTILITY SOFTWARE
Once the PC Utility software has been installed, ensure that the PC and the VEO
devices are in the same network domain. To check the devices IP please refer to
chapter 6.2.
Double clicking on the icon to open the software:
