11
7.1.2 DHCP (Dynamic Host Configuration Protocol)
If you are using a Switch or a LAN where a DHCP server is enabled, changing the IP
manually it is not necessary because the DHCP server will automatically assing a unique
IP addres to each d evice.
7.1.3. Network Requirements
Transmitters create continuous multicast streaming traffic of video on the network; for
this reason, when possible, it is recommended to create an indipendent IP video
network using managed network switches. Use of gigabit switches with jumbo frame
and IGMP support is required and will create the most appropriate scenario for both
independent IP video networks, and cases where IP video systems are included within
your data network.
7.2. Point-to-Point Connections and Operations:
1.
Connect the source device to the VEO Transmitter HDMI port.
2.
Connect the Transmitter HDMI looping output to an eventual HDMI display.
3.
Connect the remote HDMI display to the VEO Receiver HDMI port output.
4.
Connect Transmitter and Receiver with Cat5e/6 cable
