66
Mana
8.2.1
Factory Reset Using Rear Panel Button
By using this function, all previous settings will be lost
, and you will need to do the set-
up once more.
Start up the VEO-SWC44. When the Home Screen is displayed, press the reset button
at the rear panel of VEO-SWC44
. Press this button
with a pointed object
, e.g., an unbent
paper clip for at least 2 seconds,
until the “FactoryReset” page
is displayed
as below.
The
VEO-SWC44 will reboot after 3 seconds
to be default configuration.
If VEO-SWC44 HDMI output is not connected to a display and no picture is
available, press and hold the reset button
until the red LED indicator on the top surface
of VEO-SWC44 lights up to execute the reset process.
Factory Default Configuration is as following:
•
Ethernet:
o
Proxy: None
o
DHCP: Enable
•
Wireless network:
o
Frequency: 5GHZ
o
Channel: Auto
o
Auto change WiFi hotspot password: 5 minutes
•
Display & Audio
o
HDMI resolution: Auto
o
HDMI CEC:
▪
Device auto power off: ON
▪
VEO-SWC44 auto power on: OFF
o
Audio output: Jack&HDMI
o
Airplay screen quality: High
o
Display device name and password when mirroring: OFF
o
Display PCs username when mirroring: ON