4
1.2
Important Safety Instructions
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this device near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other device (including
amplifiers) that produce heat.
9.
Do not defeat the safety purpose of
the polarized or grounding type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If
the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10.
Protect the power cord from being
walked on or pinched particularly at
the plugs, convenience receptacles,
and at the point where they exit
from the device.
11.
Only use attachments/accessories
specified by the manufacturer.
12.
Unplug the device during lightening
sorts or when unused for long
periods of time.
13.
Refer all servicing to qualified
personnel. Servicing is required
when the device has been damaged
in any way, such as power supply
cord or plug is damaged, liquid has
been spilled or objects have fallen
into the device, the device has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
14.
Disconnecting from mains: When
switching off the POWER switch, all
the functions and light indicators of
the unit will be stopped, but fully
disconnecting the device from mains
is done by unplugging the power
cable from the mains input socket.
For this reason, it always shall
remain easily accessible.
15.
Equipment is connected to a socket-
outlet with earthing connection by
means of a power cord.
16.
The marking information is located
at the bottom of the unit.
17.
The device shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as
vases, shall be placed on device.
1.3
Cleaning
Clean the unit with a soft, dry clean cloth
or slightly wet with water and neutral liquid
soap only, then dry it with a clean cloth. Be careful that water never gets into the unit through
any hole. Never use alcohol, benzine, solvents or abrasive substances to clean this unit.
NEEC AUDIO BARCELONA, S.L.
accepts no liability for any damage that may be caused to
people, animal, or objects due to failure to comply with the warnings above.