7
5.
START-UP & OPERATION
The unit can be controlled and configured by following the steps indicated below
.
In
addition,
if you prefer,
it can also
be configured
by the
5.1
LCD Display control menu
To operate through the different menus, please use:
•
UP
/
DOWN
buttons of the front panel or
▲
/
▼
buttons of the Remote Control to
select the item.
•
ENTER
button of the front panel to accept or
►
button of the Remote Control. The
selected item will be highlighted in white.
MENU
button of the front panel to go back or
◄
button of the Remote Control.
5.2
Video Switching button Control
The signal switching capability includes
4 switching channels that can be flexibly configured
as input or output channels
based on specific requirements, allowing the formation of a 1x4
or 4x4 matrix.
This matrix can switch any input signal to either a single channel output or
simultaneously to all channel outputs
.
•
To select an output channel and input channel combination
,
or to perform a long press
on an input channel, follow these steps:
1.
Press the desired output channel selection.
2.
Press the desired input channel that you want to associate with the selected "output
channel".
•
To assign an input channel to more than one output channel,
follow these steps:
1.
Press one by one the output channels that you wish to perform a switch on.
2.
Press the desired input channel that you want to associate with the selected output
channels.
•
To assign an input channel to all output channels,
follow these steps:
1.
Long press any output channel.
2.
Press the desired input channel that you want to associate with all output channels.
Or
3.
Long press the desired input channel that you want to assign to all the output
channel.