Ecler VEO-MXH44D, Руководство пользователя, Страница: 19 / 32

19
PRE
CAUTI
O
N
S
PACK
AGE
CO
N
TE
N
TS
DE
SC
RIP
TIO
N
&
FEATUR
ES
IN
ST
ALL
&
CO
N
N
EC
T
ST
ART
-UP
&
O
PE
RATI
O
N
PANE
LS
& R
EM
O
TE
FUN
CT
IO
N
S
TE
CH
N
IC
AL
DATA
W
ebGUI
FRI
M
WA
RE
UPGRA
DE
6. WebGUI
The unit can be controlled and configured by its own built-in web interface by simply typing
the IP address of the chosen device into a web browser.
6.1 Change IP Address of PC
Before configuring the device through the website, it is necessary to configure the IP
address of your computer to be in the same network segment as the device.
1. Open the Network Control Center on your computer.
2. Find the network connection you are using (Ethernet or Wi-Fi).
3. Right-click on the network connection and select "Properties".
4. Look for "Internet Protocol Version 4 (TCP/IPv4)" or "IPv4" and select it.
5. Choose the option to manually set the IP address.
6. Enter an IP address that is in the same network segment as the device.
7. Set the subnet mask to match the device's network configuration.
8. Leave the default gateway field blank or enter the device's IP address.
9. Save the changes and close the network properties window.
6.2 Login by Browser
To access VEO-MXH44D WEB settings it is necessary to enter the base unit IP address in
an internet browser .
• Default IP address: 192.168.1.168
• Default username: admin
• Default password : 123456