Ecler GENIO, Руководство пользователя, Страница: 13 / 18

13
9.2. Switch configuration
The default settings for the equipment switches are as follows:
 SENS: switches at 0dB
 MODE : ST
 SRC: IN 1 – 2
 PHANTOM INPUT 1&2 : OFF
 REMOTE POWER : OFF
To change the input sensitivity (SENS), move the corresponding input switch to set it to
0, -20 or -40dB.
To change the configuration of the OUT A/B outputs, the input selection switches (SRC)
and mono/stereo output switches (MODE) can have the following positions with their
corresponding output configuration:
POSITION
SWITCHERS
OUTPUT CONFIGURATION
(OUT A/B = TX A/B)
SRC = IN 1 – IN 2
MODE = ST
OUT A = IN 1
OUT B = IN 2
SRC = IN 1 – IN 2
MODE = MONO
OUT A = IN 1 + IN 2
OUT B = IN 1 + IN 2
SRC = IN 3 – IN 4
MODE = ST
OUT A = IN 3
OUT B = IN 4
SRC = IN 3 – IN 4
MODE = MONO
OUT A = IN 3 + 4
OUT B = IN 3 + 4
SRC = ALL
MODE = ST / MONO
OUT A = IN 1 + IN 2
OUT B = IN 3 + IN 4
To activate the phantom power to the microphones as needed, the PHANTOM IN 1&2
switch must be turned ON. In the same way, to activate the remote power supply to
another GENIO unit, the REMOTE POWER switch must be turned ON.