Ecler GENIO, Руководство пользователя, Страница: 12 / 18

12
If an unbalanced output channel is connected to an amplifier or audio device with an
unbalanced input, the signal ( tip) and ground (base) terminals must be connected point
to point between the two devices.
3. Connection from unbalanced output to unbalanced input
If an unbalanced output channel is connected to an amplifier or audio device with a
balanced input, the unused output pin (terminal –) must be short-circuited to ground.
Otherwise, the output signal will not have the right level or quality.
4. Connection of unbalanced output to balanced input
9. OPERATION AND USE
9.1. Start-up
Once all the connections have been made, connect the GENIO unit to an external PSU.
The ON LED will light up in green.
In a complete audio installation it is important to start the equipment according to the
following sequence: sound sources (microphones, music players etc.), mixers, audio
processors and finally the power amplifiers. To stop them, the sequence must be
reversed. In this order, the transients produced by the turning on or off of the devices
will not affect the next one in the chain, remaining inaudible.