Ecler GENIO, Руководство пользователя, Страница: 6 / 18

6
 REMOTE POWER switch to activate/deactivate the remote power function of
another GENIO unit.
 Dimensions and weight: 200x44x130mm (1/2 RU wide, 1 RU high), 750gr
5. INSTALLATION
5.1. Location, mounting and ventilation
GENIO has been specially designed both for placement as a desktop unit and for
placement in 19" rack furniture, occupying a height unit (mounting kit included for
surface and standard rack cabinets).
GENIO does not require ventilation due to its low power consumption, however, it is
recommended that the unit is not completely enclosed or exposed to extreme
temperatures. Fresh air should be allowed to pass through the ventilation holes in the
chassis, leaving at least one free rack unit between each piece of equipment and those
installed above and below it in the rack frame.
If the installation consists of several units in the same rack or is carried out inside
cabinets closed by means of doors, it is highly recommendable to equip them with
forced upward ventilation, installing fans at their lower and upper ends. This upward
flow of ventilation will favor the dissipation of the heat generated in its interior.
5.2. Mains connection and power on
GENIO is powered from the mains by its universal external power supply. This external
power supply has several interchangeable connectors (mains plugs): American,
European, British and Chinese formats.
On the front and rear panel there is a LED ON that gets lit when the unit is in operation.
Do not allow the external power supply cable intermingles and runs parallel to the
shielded cables carrying the audio signal, as this may cause humming.