background image

 

 

7.

 

START UP 

7.1. eMOTUS5P 

To start up the system, turn on the MASTER (L) unit with the switch on the rear panel 
and adjust the volume and equalizer to the required settings. 

You  may  select  the  audio  source  (balanced  or  non-balanced  input)  by  pressing  the 
rotating volume encoder. 

7.2. eMOTUS5PB 

To start up the system, turn on the MASTER (L) unit with the switch on the rear panel 
and  adjust  the  volume  and  equalizer  to  the  required  settings.  Pressing  the  rotating 
volume encoder, the unit will be muted. 

You can select the audio source (balanced, non-balanced input or wireless connection) 
by pressing the relevant button on the remote control: BAL, UNBAL or BT. 

7.2.1. Wireless connection 

Press  the 

BT

  key  to  select  the  wireless  connection  mode.  For  pairing  the  BT,  the 

eMOTUS5PB is displayed on other devices as the eMOTUS5 (password:”0000”). Once 
paired with the emitting device, the eMOTUS5PB will act as a receiver/reproducer of the 
audio emitted by the former. 

Note: 

To safeguard the system from any possible power surges in the electrical supply, 

there is a network fuse in the MASTER unit, located in a screw mount fuse holder in the 
rear panel. In the event of this blowing, disconnect the device, remove it from the wall 
bracket,  unscrew  the  fuse  holder,  take  out  the  fuse  and  replace  it  with  another  with 
identical  characteristics.  If  the  new  fuse  blows  straight  away,  consult  our  Technical 
Department. 

 

Содержание eMOTUS5P















Отзывы: