6
3.1
MAIN FEATURES
•
4 amplified outputs
VersaPower 2400W.
•
4 Dante
™
outputs and
4 Dante
™
inputs.
•
2 auxiliary outputs.
•
4 analogue inputs.
•
MicroSD/SDHC card
slot audio player.
•
Internal matrix and
signal processing.
•
Web application for
device configuration.
•
Smart power
management Smart
VersaPower.
•
Control and scheduled
events for automation.
•
Customize user panels.
•
Remote control user
application for
iOS/Android/Web.
•
Energy saving (Ultra-
low power consumption
mode).
VersaPower
is the amplification technology, developed by Ecler, that allows
asymmetrical power distribution among amplified outputs, independent of load.
Smart Versapower
is the tool that allows automatic gain and sensitivity adjustment,
to distribute in an easy and quick way, the total power among the amplified outputs.
4.
INSTALL & CONNECT
The equipment must be correctly grounded (ground resistance, Rg = 30 Ohm or less). The
environment must be dry and dustless. Do not expose the unit to rain or water splashes,
and do not place liquid containers or incandescent objects like candles on top of the unit.
Do not obstruct the ventilation grilles
with any kind of material. If the device requires any
intervention and/or connection/disconnection, it must be first powered off.
Do not handle the speaker output terminals
with your device turned on, there are high
voltages. The output cabling should be connected by a qualified technician. Otherwise only
use pre-made flexible cables. There are no user serviceable parts inside the amplifier.
Non-compliance with the instructions or neglecting warnings may cause
malfunction or even damage the unit.
•
Avoid turning on the device without the speakers connecte
d to its outputs and
without having previously set the volume/gain controls to minimum level.
•
Always use shielded cables
to make connections between devices.
•
In an amplifier, avoid placing the speaker output cables close to other signal
cables
(micro, line…). This may cause the system to oscillate, damaging the
amplifier and speakers.
