Ecler essentials eSAM402, Руководство пользователя

Страница: 6 / 15

6
INSTALLATION
The eSAM402 mixer has been specially designed to be installed in a standard 19" rack,
taking up 1U. It has been designed to be operated by non-technical users. This is the
reason why its tone controls are adjustable only with a screwdriver. On the opposite,
input and output level controls use classic and easily accessible rotary knobs.
Due to its low power consumption and heat sink, the eSAM402 doesn't need any fan
cooling. However, avoid installing it in dusty environments and/or in a location with
extreme temperature and moisture.
The mixer should be kept apart from noise and interference sources (dimmers, motors,
etc...) as well as from power cables.
The eSAM402 is powered by alternating current through its external power supply: 100-
240 VAC and 50-60 Hz. This external PSU has interchangeable connectors: American,
European, British and Chinese.
In order to protect the mixer from eventual overloads, the eSAM402 is protected by a
timered power fuse of 0.5A. If it gets blown up, you must replace it with an identical one.
If it gets blown up, you must replace it with an identical one. NEVER REPLACE THE FUSE
WITH ANOTHER ONE WITH A HIGHER VALUE.
CAUTION:
Fuse substitutions have to be performed by a qualified technician.