ECKELMANN VS 3015 CT, Инструкция по эксплуатации, Страница: 206 / 219

Firmware V1.41 V1 08.11.2022 206/219
•
•
•
•
DIAGNOSE
POS:XXXXX Description Inpu
t Defa
ult
Fan indx Configuring for which ebm-papst fan the diagnosis parameters shall be displayed 1..12 1
error counter Will be increased if at least one error occures during a communication cycles
maximum number of errors is 5. If the number of errors exceedes 5 an alarm will be signalled -
timeout Error Counter for timeout -
exception Error Counter für exception -
crc Error Counter for crc-error -
wrong
response Error Counter for: response was sent from a wrong Modbus Slave (e.g.: request sent to Slave A, answer
received from Slave B) -
error reset If this parameter is set to "Y", the Error Counters will be reset to 0. Afterwards this parameter will be set to
"N" again.
J N
10.1.7 Menu 6 Operating Data
OP DATA POS: XXXXX Description
1 On time Continue to menu 6-1
2 History Continue to menu 6-2
Menu 6-1 Display of the operating hours
OP DATA POS: XXXXX Description
1 Compressor Continue to menu 6-1-1
2 Condenser fan Continue to menu 6-1-2
3 Par. compr. Continue to menu 6-1-3
4 LT Comp. Continue to menu 6-1-4
Menu 6-1-1 Compressor stages operating times
OP DATA POS: XXXXX Description Input Default Dim.
On time C 1 XXXX h Display and input of the compressor run times.
Only the available compressor stages are
displayed. ↑, ↓ 0..9999 0h Hour
...
On time C 8 XXXX h as above 0h Hour
Basic module: 1 – max. 4 capacity stages
with first SIOX extension module 1 – max. 8 capacity stages
Menu 6-1-2 Fan stages operating times
OP DATA POS: XXXXX Description Input Default Dim.
On time F 1 XXXX h Display and input of the fan run times. Only
the available fans are displayed. ↑ , ↓ 0..9999 0h Hour
...
On time F 12 XXXX h as above 0h Hour
Modbus: 1 – max. 12 fan run times
with first SIOX extension module 1 – max. 4 fan run times
Menu 6-1-3 Parallel compressor stages operating times