Firmware V1.41 V1
08.11.2022
167/219
9.2.3.2 CI 3x00 Store Computer/ AL 300 Operator Terminal - Unlock
Before entering values, the input lock on the store computer or operator terminal must be deactivated as
follows:
Step 1:
Select menu item 9 "Parametrisation" in the main menu.
Step 2:
Select menu item 3 "Lock-down" in this menu.
Step 3: A. Unlocking store computer (standard)
Tap the
ENTER
button (
) to set the marker (√). The lock-
down has now been deactivated and it is possible to make settings.
or B. Unlocking store computer and
activating Superuser mode (Superuser permissions)
Input current date backwards (nothing is shown on the
display).
Example:
The current date is April 17, 2016, i.e. 17/04/16; the required input for enabling Superuser
permissions is then 614071.
Confirm the input with the
ENTER
button (
); an "S" is shown on the display.
Step 4:
Exit the operating screen and return to the main menu by tapping the ESC button twice.
9.2.4 Activating Service Mode
For repair and maintenance work, service personnel can deactivate the remote alarm function of the system
centre and of the store computer for a limited period using the service mode.
9.2.4.1 CI 4x00 System Centre Service Mode
Activating/deactivating service mode
9.2.4.2 CI 3x00 Store Computer - Service-Mode
Activating/deactivating service mode
Step 1:
Select menu item 9 "Parametrisation" in the main menu.
Tip:
If you are already in the user interface of a CAN bus node but have forgotten to deactivate the
input lock-down, you can unlock the input lock-down for this controller using the button combination
MODE
and
,
. The input lock-down is active again as soon as you exit the user interface of the
controller.
The service mode is exclusively reserved for service personnel! If there are still pending alarms (with
the priority 1..99) after the time for the service mode has elapsed, the audible warning devices and the
alarm relays are activated and the alarms are forwarded using the automatic transmission of alarms.
The service mode can only be activated if the system centre has previously been unlocked; see
Содержание VS 3015 CT
Страница 46: ...Firmware V1 41 V1 08 11 2022 46 219...
Страница 52: ...Firmware V1 41 V1 08 11 2022 52 219 Number of gas ejectors 3 ejectors have the same size YES...
Страница 120: ...Firmware V1 41 V1 08 11 2022 120 219 No Function 1 2 3 4 SHIELD GROUND green CAN LOW brown CAN HIGH white...
Страница 159: ...Firmware V1 41 V1 08 11 2022 159 219 Display of the setpoint characteristic...