ECKELMANN VS 3015 CT, Инструкция по эксплуатации, Страница: 186 / 219

Firmware V1.41 V1 08.11.2022 186/219
•
•
V. UNLO T ID: XXXXX Description Input Default Dim.
V. UNLO T S1 XXX s Only the available capacity stages are
displayed. 3..250 20 sec.
V. UNLO T S2 XXX s 3..250 40 sec.
V. UNLO T S3 XXX s 3..250 60 sec.
V. UNLO T S4 XXX s 3..250 80 sec.
V. UNLO T S5 XXX s 3..250 100 sec.
V. UNLO T S6 XXX s 3..250 120 sec.
..
V. UNLO T SN* XXX s 3..250 120 sec.
*Basic module: 1 – max. 4 capacity stages
with first SIOX extension module: 1 - max. 8 capacity stages
Menu 3-2-2 HP control
HP CONT ID: XXXXX Description
1 Regulation Continue to menu 3-2-2-1
2 Setpoints Continue to menu 3-2-2-2
3 HR Continue to menu 3-2-2-3
Menu 3-2-2-1 Regulation
HP CONT ID: XXXXX Description Input Default Dim.
Type of control → Selection list HP type of control → Screen
3-2-2-1-a
Switching Order → To the submenu for defining the switching order of the fans (of the stages in the
gas cooler package).. The switching order must be assigned to the physical
position in the gas cooler package (see chapter
Gas cooler package with ebm-
papst fans ).
→ Screen
3-2-2-1-b
EBM Manual Run → To the submenu for the manual operation of the fans. → Screen
3-2-2-1-c
Min. Drehzahl XXX% Min. fan speed
(only visible if speed controller type of control has been selected - screen
3-2-2-1-a) 0..100 0 %
Max. speed XXX% Max. fan speed
(only visible if speed controller type of control has been selected - screen
3-2-2-1-a) 0..100 100 %
MaxSpeed Night
XXX% Max. fan speed in night operation (second setpoint)
(only visible if speed controller type of control has been selected - screen
3-2-2-1-a) 0..100 80 %
p-factor X.X p-factor (amplification factor) for fan speed control signal
(only visible if speed controller or combined control type of control has been
selected - screen 3-2-2-1-a) 0.1..5.0 1.0 -
P-Wert p X.X Pressure-dependent p-factor (amplification factor) for fan speed control signal
(only visible if speed controller or combined control type of control has been
selected - screen 3-2-2-1-a) 0.1..2.0 0.0
- -
i-factor X.XX i-factor (integral factor) for fan speed control signal
(only visible if speed controller or combined control type of control has been
selected - screen 3-2-2-1-a) 0.00..1.00 0.03 -