ECKELMANN VS 3015 CT, Инструкция по эксплуатации, Страница: 169 / 219

Firmware V1.41 V1 08.11.2022 169/219
10 VS 3015 CT Menu Structure
The pack controller must be parametrised using a connected operator terminal. The parametrisation is
performed via the CAN bus interface using which the communication with the pack controller takes place. It
makes no difference for the operation of the pack controller whether this is done with a system centre, a store
computer or an operator terminal; see chapter
System design VS 3015 CT .
10.1 Menu tree
Main menu Submenu 1 Submenu 2 Screen No. Screen name
1 Overview Display of actual values 1
2 Actual values 2 ACT.VALUES
Analogue values 2-1 ANALOGUE VAL
Cyl.temp. 2-1-a ANALOGUE VAL
PC Cyl. Temp. 2-1-b ANALOGUE VAL
LT Cyl.temp. 2-1-c ANALOGUE VAL
Compressor 2-2 COMPRESSOR I0
Condenser fans 2-3 CONDENSER FANS
System 2-4 SYSTEM
- 2-5 -
COP 2-6 COP
Cond. mon. 2-7 COND. MON
Ejectors 2-8 EJECTORS
3 Setpoints 3 SETPOINTS
System config. 3-1 CONFIG
-
Sensor match 3-1-b TRANSDUCER
Text Oil/HP-F 3-1-c T. Oil/HP-F
Enable comp.stages 3-1-d ENABL.COMP
Enable cond.stages 3-1-e ENAB.COND
COP sensor h1 3-1-f SENSOR H1
COP sensor h2 3-1-g SENSOR H2
COP sensor h3 3-1-h SENSOR H2
Control Type 3-2 SETPOINTS
LP-Control 3-2-1 NP CONT
HP-Control 3-2-2 HP CONT
MP-Control 3-2-3 MP CONT
Spray-System 3-2-4 SPRAY
MP pack reg. 3-2-5 MP PACK
LT Comp. Contr. 3-2-6 LT-REFR.