Firmware V1.41 V1
08.11.2022
165/219
9.2.2.1 CI 4x00 System Centre - Remote Control
The terminal for remote control of the controller (menu 2-2 or menu 4-2) is called in the system centre as
follows:
Step 1:
Tap "
2 - System overview
" or
"4 - Configuration
" in the main menu. If "2" is selected, the values
below are only displayed as read-only; for "4", the input lock must be previously deactivated by logging in (see
), so that the settings below can be made.
Step 2:
Tap "
2 Case controllers
" and select the required controller in the list that is then displayed using the
cursor buttons (↑) and (↓). In the screen that opens, the name, position designation and the alarm priority of the
controller can be input as required.
Step 3:
The main menu of the controller is then displayed by tapping the "Remote control" button:
9.2.2.2 CI 3x00 Store Computer / AL 300 Operator Terminal - Remote Control
The main menu of the controller is called in the store computer or operator terminal via the remote control as
follows:
Step 1:
Select the submenu "5 Remote control" in the main menu (see graphic).
Step 2:
Select the required controller using the cursor buttons (↑) and (↓) or by input of the CAN bus address
(node number
nnn
) using the digit buttons. Thereby, the following screen is displayed:
Содержание VS 3015 CT
Страница 46: ...Firmware V1 41 V1 08 11 2022 46 219...
Страница 52: ...Firmware V1 41 V1 08 11 2022 52 219 Number of gas ejectors 3 ejectors have the same size YES...
Страница 120: ...Firmware V1 41 V1 08 11 2022 120 219 No Function 1 2 3 4 SHIELD GROUND green CAN LOW brown CAN HIGH white...
Страница 159: ...Firmware V1 41 V1 08 11 2022 159 219 Display of the setpoint characteristic...