ECKELMANN VS 3015 CT, Инструкция по эксплуатации, Страница: 164 / 219

Firmware V1.41 V1 08.11.2022 164/219
ENTER button Letters / characters
0 äöüß0, space character
1 1
2 2ABC
3 3DEF
4 4GHI
5 5JKL
6 6MNO
7 7PQRS
8 8TUV
9 9WXYZ
- . _ -
, Insert space character
Exit from the menus and operating screens
Tap the ESC button to exit from menus and operating screens. This returns to the next higher-level menu. All
menus and operating screens are exited automatically 10 minutes after the last time any button was tapped. A
jump to the main menu or to the alarm menu if any error message is pending (only store computer / operator
terminal) is performed here.
9.2.2 Call Controller Menu using Remote Operation
Upper case and lower case can be toggled by tapping the MODE button.

If the system centre, store computer or operator terminal remains locked down, settings on the
controller are read-only. Changes and inputs are not possible.
However, if any parametrisation is required, the input lock must be deactivated, see
Deactivating the
Input Lock .
Tip: Detailed descriptions for the basic configuration of the controller, name of the controller and its
position designation or about the settings of important parameters can be found in chapter Default
parameter settings .
