ECKELMANN VS 3015 CT, Инструкция по эксплуатации, Страница: 163 / 219

Firmware V1.41 V1 08.11.2022 163/219
•
•
Menus
A menu can contain up to ten menu items (0 .. 9; 0 for menu item 10). After the selection of an element using
the cursor buttons (↑) and (↓) and tapping the ENTER button ( ) or by tapping the buttons 0..9, further
submenus or operating screens are provided.
Selection of the menu items
Each line of this selection list in the display has a digit between 1 and 9 and 0 for menu item 10 with the
associated name of the corresponding menu item. The various menu items can be selected directly by tapping
the digit buttons 0 .. 9.
If a menu provides more than 3 submenus, the cursor buttons (↑) and (↓) can be used for scrolling in the menu
to display the remaining menu items.
Operating screens
An operating screen contains values for output and/or values for input. More values for output and/or input can
be available than can be shown on the display. In this case, these values can be displayed by scrolling. If an
operating screen contains several pages, these can be paged through.
Scrolling
Using the cursor buttons (↑) and (↓),
scrolling can be line by line, e.g. for selection of a variable in a line from a list of predefined variables.
scrolling can be block by block so that values can be shown that cannot be displayed with the others due to
the limited capacity of the display.
Paging
If an operating screen contains multiple pages (e.g. the alarm list), these can be paged through using the
cursor buttons (↑) and (↓). In menus that provide more than 3 submenus, these can be paged through using the
cursor buttons (↑) and (↓) to display the remaining menu items.
The button combinations
MODE + 9 can be used in the operating screens to scroll three lines upwards and
MODE + 3 to scroll three lines downwards.
Input of values and text
Select the required line using the cursor buttons (↑) and (↓) and then tap the ENTER button ( ). The cursor
jumps to the input field. Values can now be entered and changed here using the cursor buttons (↑) and (↓) or
the digit buttons.
If the cursor buttons are kept tapped, the adjustment is made in high speed mode.
Delete input text
The MODE button and - must be tapped simultaneously to delete the complete text line. A character is deleted
using the button combination MODE and , .
Cancelling an entry
The entry of a value can be cancelled by tapping the ESC button. The value is not applied.
Text input
For fields that enable input of texts, the text input is also possible using the alphanumeric keyboard. Letters are
generated by multiple tapping of the digit buttons. To accept the entered value / text, tap the ENTER button (
).
In contrast to the system centre, store computer or operator terminal, the menu of the controller is
displayed directly on the terminal device.

A menu item does not have to be displayed to select it using a numeric button.

If it is possible to scroll or page in a menu or an operating screen, this is indicated by direction arrows
on the right in the display.
