ECKELMANN VS 3015 CT, Инструкция по эксплуатации, Страница: 117 / 219

Firmware V1.41 V1 08.11.2022 117/219
6.2.1.2 SIOX - Status LEDs
Function Colour LED Description
1 Relay
outputs green LED1
..
LED8 On: Relay is activated
ATTENTION DANGER TO LIFE: External voltage
can be present at these terminals!
2 Digital
inputs red LED1
..
LED12 On: Digital input is activated
ATTENTION DANGER TO LIFE: External voltage
can be present at these terminals!
3 Communication green LED1 Flashing: Communication to the base module is
OK.
ON: Error - no communication! Check SIOX data
cable if necessary.
OFF: Error - no communication! Check SIOX data
cable and SIOX power supply cables if necessary.
6.2.2 Default settings using S1
Coding switch 1 setting
DIP switch S1 coding switch 1 is not used:
DIP switch S1
Coding switch 1 Switch positions Pack type
ON Not used
OFF Not used
Coding switch 2 setting
DIP switch S1 coding switch 2 specifies the maximum number of compressors- and the use of relay controlled
fan capacity stages.
In the basic version, the controller can control 4 compressor stages. An additional SIOX128 expansion module
is required for the use of up to 8 compressor stages and up to 4 relay-controlled fans.
DANGER
Warning about dangerous electrical voltage! Danger of electric shock! The device must never be
operated without its case. Before opening the case, the device must be disconnected from the power
supply
