ECKELMANN UA 410 L AC, Руководство по эксплуатации

Страница: 89 / 100

Firmware V3.00 05.08.2019 89/100
9.8 Menu 6 Configuration
CONFIGURAT POS: XXXXX
1 Refriger. Point Move to menu 6-1
2 Controller Move to menu 6-2
3 Language Move to menu 6-3
• Menu 6-1 Refriger. Point
REFR. PT. POS: XXXXX Entry Default
Refr. Pt. Name: Text only
xxxxxxxxxxxxxxx Free text entry describing refrigeration point (see note following table) Case controller
Item ID: XXXXX Free text entry displayed in screens after POS ID (see note following
table) UA400
Priority: XX Alarm priority in failure of refrigeration point 1
Sensor Fault XXX Sensor break alarm delay 0..15 0m
No. Sensors XX
Number of temperature sensors connected. After entering sensor
scan is performed to redetermine the number of sensors.
• Menu 6-2 Controller
CONTROLLER POS: XXXXX
1 Type and Version Move to menu 6-2-1
2 Sensor type Move to menu 6-2-5
• Menu 6-2-1 Type and Version
VERSION POS: XXXXX Entry Default
CTRLR. Type XXXXXXX Set by DIP switch S3 - UA400L
Software Vers.: XXXX Software version of case controller -
Serial No.: XXXXXX Device No. of case controller -
A meaningful name that describes the refrigeration point in more detail should be entered, e.g. Cheese
Counter 2 and CC2. The input is made using the menus of the system centre, store computer, operator
terminal or the BT 300 operator interface.
