ECKELMANN UA 410 D, Руководство по эксплуатации

Страница: 82 / 142

Operation of UA 410 D
74 Firmware V1.40 - Doku 2.1 06. April 2016
7.3.3 Deactivating the input lock-down
Operation via system centre, store computer or operator terminal is only possible for controllers with CAN bus
connection; the removal of the lock-down is then applicable for all components in the CAN bus system. The
lock-down is automatically reactivated 15 minutes after the last button tap.
The release of the lock-down must only be carried out by service personnel.
Before entering values, the input lock-down must be removed as follows:
7.3.3.1 System centre CI 4x00
Login to and logout (unlock and lock-down) of the system centre:
Anmeldung
Benutzername
Passwort
Benutzername: Service
0000 Passwort:
Konfigurieren /
Sollwerte verändern
ist möglich
Abmelden (Systemzentrale wieder verriegeln)
Einfach Button drücken
oder
Abmeldung erfolgt
automatisch nach 5 Minuten
Service
0000
Master ( Benutzername: Erweiterte Rechte z. B. für spezielle Einstellungen am UA 410 E)
Passwort: 0000
Anmelden
7.3.3.2 Store computer CI 3x00 / operator terminal AL 300
Before entering values, the input lock must be removed from the store computer or operator terminal as follows:
Step 1: Select menu item 9 "Parametrisation" in the main menu.
Step 2: Select menu item 3 "Lock-down" in this menu.
Step 3: A. Unlocking store computer (standard)
Tap the ENTER button (
↵
) to set the marker (
√
).
The lock-down has now been deactivated and it is possible to make settings.
or
B. Unlocking store computer and activating Superuser mode (Superuser permissions)
Input current date backwards (nothing is shown on the display).
Example: The current date is April 17, 2016, i.e. 17/04/16;
the required input for enabling Superuser permissions is then 614071.
Confirm the input with the ENTER button (
↵
); an " S " is shown on the display.
Step 4: Exit the operating screen and return to the main menu by tapping the ESC button twice.
Tip: If you are already in the user interface of a CAN bus node but have forgotten to release the in­
put lock-down, you can unlock the input lock-down for this controller using the button combination
MODE and , . The input lock-down is active again as soon as you exit the user interface of the con­
troller.