LAN Gateway Firmware V1.2
V1.8 25. April 2012
© 2012 – ECKELMANN AG | BERLINER STRASSE 161 | 65205 WIESBADEN | PHONE +49(0)611 7103-0 | FAX +49(0)611 7103-133 | eckelmann.de
28/34
6 Important commands of the monitor interface
Command
Meaning
!
(hold keys)
Activation of the update mode during a reboot
?
(hold keys)
Activation of the monitor interface
task [Name ...]
List of tasks
stack [Name ...]
Displays the stack backtrace for the transmitted task.
trap [?]
Administration and display of the trap handling.
heap
[free|used|full]
Displays the heap capacity.
memcheck
Display of the heap capacity and the task list
mbx [Name ...]
List of the mailboxes.
testalarm
Sends a test alarm (prio. 0) to the CI 3000 (CAN bus test).
testmsg
Send a loopback message to the store computer.
cycmemtest
Reserved for system diagnosis.
canconf
Configuration of the LAN gateway CAN bus address (see section 4.5.3).
ipconf
Configuration of the LAN gateway IP address (see section 4.5.1).
lgwportconf
Configuration of the LAN gateway’s TCP/IP port (see chapter 4.5.2).
tracelevel
Configuration of the trace level
ping
Sends a ping command to the specified IP address for a network test
netstat
Displays the TCP/IP stack
date
Controls the LAN gateway system time
(time is compared with the store computer).
zy cmd
Reserved for system diagnosis.
ver
Shows the bootloader versions and the firmware currently loaded.
reboot
Carries out a reboot of the LAN gateway.
help
Displays the boot monitor commands.
autoreboot
Configuration of the reboot interval (see section 4.5.4).
showuptime
Displays the uptime of the LAN gateway since the last reboot.
showsysconf
Overview of the system configuration
