ECKELMANN AL 300 S, Руководство по эксплуатации

Страница: 15 / 61

Application of AL 300
10
Version 3-1 05. Dezember 2019
Version 4.06
When a CI 3000 Store Computer of Version 4.08 or higher is connected to the LDS System, the AL 300 Opera­
tor Terminals used must also be Version 4.06 or higher.
Version 4.03
When a CI 3000 Store Computer of Version 4.03 or higher is connected to the LDS System, the AL 300 Opera­
tor Terminals used must also be Version 4.03 or higher.
Version 3.04
Version 3.04 of the AL 300 Operator Terminal is fully compatible with all LDS components.
2.3.1 New features compared to earlier versions
Version 5.06
If a CI 4x00 System Centre with Version 6.0.0 or higher or a CI 3000 Store Computer with Version 5.00 or hig­
her is available in the E*LDS system, AL 300 Operator Terminals with Version 5.06 or higher must also be
used. LDSWin with Version 2.4.4008 or higher is required for systems with a CI 4x00 System Centre with Ver­
sion 6.0.0 or higher.
Version 4.10
Functionally adaptation to CI 3000 Store Computer version 4.24 or higher.
Version 4.08
Functionally adaptation to CI 3000 Store Computer version 4.19 or higher.
(u.a. Integration of the WR 300 / WR 400 receiver modules for TS 30 W wireless sensors
)
Version 4.06
Functionally adaptation to CI 3000 Store Computer version 4.03 or higher
(e.g. integration of compact controllers UA 30Rx/Dixell/other controllers)
Version 4.03
Functionally adaptation to CI 3000 Store Computer version 4.03 or higher.
Version 3.04
S
Supports service mode of CI 3000 Store Computer:
Service technician can suppress remote alarming for a defined time (1 to 255 min.) while maintenance is be­
ing carried out.
S
Alarm takeover by service center
S
Last-in alarm changed on alarm relays:
New alarms are now reported during the time delay.