RVS/RCS
This guide covers Resonate Vacancy/Occupancy sensor models, RVS-A-
xW
,
RVS-B-
x
W, RCS-A-
x
W and RCS-B-
xW
.
The RCS is identical to the RVS with the
addition of a battery to provide power for support of auto-on occupancy sensor
applications.
The character
x
in the model number is replaced with U for 902MHz, Y for
868MHz radios, and J for 928MHz radios.
The package includes the sensor, installation guide, lens mask sticker and two
wire adaptor straps for soft ceiling tile mounting. The cover is removable. Please
note: the cover must be fully seated for proper operation.
Resonate Vacancy/ Occupancy Sensor Description
The RVS/RCS (also referred to as the sensor in this guide) is a wireless, energy
harvesting sensor that monitors room occupancy state using a passive infrared
motion (PIR) detector. The RVS/RCS sensors are intended for indoor use only,
mounted on a ceiling at 8-10 feet from the floor.
NOTE: The RVS is a solar powered device that absorbs solar energy from artificial or
natural light sources. Before assigning the RVS sensor to a receiver or controller, the
sensor should be exposed to a good light source for a minimum of 2 minutes.
Resonate Wireless
Vacancy/Occupancy Sensor
Installation Guide
echo
flex
Powered by ETC
