Echoflex Installation Guide
Magnetic Contact Sensor
Magnetic Contact Sensor (MC-31)
Page 11 of 12
Echoflex
Redundant Messaging
The Redundant Messaging can be enabled to provide a backup to the
original contact state message. For installation locations not ideal for
wireless communications and where hardwired devices are not an option,
enabling redundant transmissions may improve reliability.
1. Press and hold the
[Teach]
button until the white LED blinks twice.
2. Press and release the
[Teach]
button to cycle through the menu of
color LEDs and stop when the red LED triple-blinks.
3. Press and hold the
[Teach]
button until the white LED blinks twice to
select Redundant Messaging.
The red LED blink code displays the current setting. Press and release
the
[Teach]
button to navigate the options.
4. Press and hold the
[Teach]
button until the white LED blinks twice
when the target indication displays. The MC-31 saves the setting and
then restarts.
Restore Defaults
To restore all the factory default settings:
1. Press and hold the
[Teach]
button until the white LED blinks twice.
2. Press and release the
[Teach]
button to cycle through the menu of
color LEDs and stop when blue, red, blue LEDs triple-blink.
3. Press and hold the
[Teach]
button until the white LED blinks twice to
restore defaults and restart.
Indication
Setting
1 red blink
Disable (default)
2 red blinks
Enable
