background image

HT235

SAFETY

X7712240502

5

© 06/22 ECHO Incorporated

SAFETY

Manual Safety Symbols and Important Information

Throughout this manual and on the product itself, you will find safety alerts 

and helpful, informational messages preceded by symbols or key words. 

The following is an explanation of those symbols and key words and what 

they mean to you.

The safety alert symbol accompanied by the word “DANGER” 
calls attention to an act or condition which WILL lead to serious 
personal injury or death if not avoided.

The safety alert symbol accompanied by the word “WARNING” 
calls attention to an act or condition which CAN lead to serious 
personal injury or death if not avoided.

The safety alert symbol accompanied by the word “CAUTION” 
calls attention to an act or condition which might lead to minor 
or moderate personal injury if not avoided.

The enclosed message provides information necessary for the 
protection of the unit.

Note:  This enclosed message provides tips for use, care and 

maintenance of the unit.

CIRCLE AND SLASH SYMBOL

This symbol means the specific action shown is prohibited. 

Ignoring these prohibitions can result in serious or fatal injury.

Содержание Shindaiwa HT235













































Отзывы: