DESCRIPTION
SHC-225/S
14
X7502257007
© 4/2016 ECHO Inc.
1.
POWER HEAD
- Includes the Engine, Clutch, Fuel System, Ignition
System and Recoil Starter.
2.
THROTTLE HANDLE - FOR RIGHT HAND
- Contains Stop Switch,
Throttle Lockout, and Throttle Trigger.
3.
THROTTLE TRIGGER LOCKOUT
- This lever must be held during
starting. Operation of the throttle trigger is prevented unless throttle trigger
lockout lever is engaged.
4.
STOP SWITCH
- “SLIDE SWITCH” mounted on top of the Throttle Handle.
Move switch FORWARD to RUN, BACK to STOP.
5.
DRIVE SHAFT ASSEMBLY
- Contains the Flexible Drive Cable.
6.
SUPPORT HANDLE - FOR LEFT HAND
- Adjustable, loop handle for
proper cutting attitude and operator comfort.
7.
BLADES
- Double reciprocating blades mounted to a blade support bar.
Double sided blades, are capable of cutting on either side.
8.
GEAR HOUSING ASSEMBLY
- Gear housing assembly fixed straight
extension.
9.
THROTTLE TRIGGER
- Spring loaded to return to idle when released.
During acceleration, depress gradually for best operating technique.
10.
BLADE COVER
- Used to cover blade during transport and storage.
Remove blade cover before using unit.
11.
SPARK PLUG
- Provides spark to ignite fuel mixture.
12.
TOP GUARD
- Protects arm from the hot engine.
13.
SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER
WITH CATALYST
- The muffler or catalytic muffler controls exhaust noise
and emission. The spark arrestor screen prevents hot, glowing particles of
carbon from leaving the muffler. Keep exhaust area clear of flammable
debris.
14.
FUEL TANK
- Contains fuel and fuel filter.
15.
FUEL TANK CAP
- Covers and seals fuel tank opening.
16.
RECOIL STARTER HANDLE
- Pull handle slowly until starter engages,
then quickly and firmly. When engine starts, return handle slowly. DO NOT
let handle snap back or damage to unit will occur.
17.
PURGE BULB
- Pumping purge bulb before starting engine draws fresh
fuel from the fuel tank, purging air from the carburetor. Pump purge bulb
until fuel is visible and flows freely in the clear fuel tank return line. Pump
purge bulb an additional 4 or 5 times.
18.
CHOKE
CONTROL
- Located on the air cleaner housing. Move choke lever
to Cold Start (
) to close choke for cold start. Move choke lever to “Run”
(
) position to open choke.
19.
AIR CLEANER
- Contains replaceable filter element.