PB-760LN
ASSEMBLY
X7531125905
19
© 10/19 ECHO Incorporated
ASSEMBLY
PB-760 H
Never perform maintenance or assembly procedures with
engine running or serious personal injury may result.
Install Blower Pipes/Stick Handle
1.
Assemble clamps (A) onto both
ends of flexible pipe (B).
2.
Assemble swivel pipe (C) into
flexible pipe (B) and tighten
clamp (A).
3.
Assemble flexible pipe (B) to
elbow (D) on blower and tighten
clamp (A).
Note: A light lubricant may be
used to ease assembly of
flexible pipe to blower
elbow.
4.
Loosen wing nut (H). Align
notches in handle clamp with
tabs (F).
5.
Slide stick handle onto swivel
pipe (C). Stick handle (E) should
be angled away from operator.
6.
Position stick handle (E) over
metal plate on swivel pipe and
adjust for comfortable operation.
Tighten wing nut (H).
A
A
B
C
A
B
D
H
F
C
E
