22
X7531125901
© 4/2015 ECHO Inc.
OPERATION
PB-760 LN H/T
Starting Warm Engine
The starting procedure is the same as Cold Start except DO
NOT close the choke.
- PB-760 LN H
1.
Throttle Lever
Move throttle position lever (A) to IDLE DETENT position.
- PB-760 LN T
1.
Throttle Position / Stop Switch Button
Slide Throttle Position / Stop Switch Button (A) back to IDLE
position.
- PB-760 LN H and T
2.
Purge Bulb
Pump purge bulb (D) until fuel is visible. Pump bulb an
additional 4 or 5 times.
3.
Recoil Starter
Pull recoil starter handle (E) and engine should start. Do not
use choke (C).
Note: If engine does not start after 5 pulls, use cold start
procedures.
Stopping Engine
- PB-760 LN H
1.
Throttle Lever
Move throttle lever (A) to IDLE DETENT position and allow
engine to return to idle before shutting off engine.
2.
Throttle Lever
Move throttle lever (A) to STOP (
O
) position.
- PB-760 LN T
1.
Throttle Position / Stop Switch Button
Release throttle trigger. Move Throttle Position / Stop Switch Button (A) forward to IDLE position and allow
engine to return to idle before shutting off engine.
2.
Throttle Position / Stop Switch Button
Move Throttle Position / Stop Switch Button (A) all the way forward to STOP position.
If engine does not stop when stop switch is moved to STOP position, close choke - COLD START
position - to stall engine. Have your ECHO dealer repair stop switch before using unit again.
PB-760 LN H
PB-760 LN T
A
C
E
D
PB-760 LN H
PB-760 LN T
A
