Echo PB-250LN, Руководство оператора

Страница: 23 / 44

X7501186001 23
© 2/2016 ECHO Inc.
PB-250LN OPERATION
4. Recoil Starter
Place the unit on a flat, clear area.
Firmly grasp throttle handle with
left hand and rapidly pull recoil
starter handle/rope (E) until
engine fires.
Recoil starter: Use short pulls -
only 1/2 ~ 2/3 of rope for starting. Do not allow the rope to snap back in.
Always hold the unit firmly.
Note: If engine does not start after 5 pulls, use Cold Start Procedure.
Stopping Engine
1. Throttle Trigger/Throttle
Position Lever
Release throttle trigger (F).
Move throttle position lever (B)
forward to idle position and
allow engine to return to idle
before shutting off engine.
2. Stop Switch
Move stop switch (A) to STOP position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine. Have
your ECHO dealer repair stop switch before using unit again.
Operating Blower
Engine exhaust IS HOT, and
contains Carbon Monoxide
(CO), a poison gas. Breathing
CO can cause
unconsciousness, serious
injury, or death. Exhaust can
cause serious burns. ALWAYS position unit so that exhaust is
directed away from your face and body.
E
A
B
F
A
B
F