background image

G

RASS

 T

RIMMER

O

PERATOR

'

S

 M

ANUAL

3

S

AFETY

MANUAL

 

SAFETY

 

SYMBOLS

 

AND

 

IMPORTANT

 

INFORMATION

This symbol accompanied by the words
WARNING and DANGER calls attention to an
act or condition that can lead to serious personal
injury to operator and bystanders.

IMPORTANT

The enclosed message

provides information necessary for the
protection of the unit.

NOTE

This enclosed message provides tips

for use, care and maintenance of the unit.

Throughout this manual and on the product itself, you will find safety
alerts and helpful informational messages preceded by symbols or key
words. The following is an explanation of those symbols and key words
and what they mean to you.

The circle with the slash symbol means whatever is
shown within the circle is prohibited.

INTERNATIONAL

 

SYMBOLS

BEWARE

-  THROWN,

RICOCHET

OBJECTS

WEAR HAND AND

FOOT PROTECTION

HOT

SURFACE

SYMBOL

DESCRIPTION/APPLICATION

SYMBOL FORM/

SHAPE

SYMBOL

DESCRIPTION/APPLICATION

SYMBOL FORM/

SHAPE

Read and understand

Operator's Manual.

WEAR EYES, EARS

AND HEAD

PROTECTION

FUEL AND OIL

MIXTURE

FINGER SEVERING

SAFETY/ALERT

DO NOT SMOKE

NEAR FUEL.

WEAR SLIP

RESISTANT

FOOT WEAR.

DO NOT EXCEED

10,000 RPM.

SYMBOL

DESCRIPTION/APPLICATION

SYMBOL FORM/

SHAPE

SYMBOL

DESCRIPTION/APPLICATION

SYMBOL FORM/

SHAPE

CARBURETOR

ADJUSTMENT

- IDLE SPEED

CARBURETOR

ADJUSTMENT
- HIGH SPEED

MIXTURE

EMERGENCY STOP

CARBURETOR

ADJUSTMENT

- LOW SPEED

MIXTURE

DO NOT ALLOW

FLAMES OR

SPARKS NEAR

FUEL.

IGNITION

ON/OFF

PRIMER

BULB

KEEP BYSTANDERS AND HELPERS

AWAY 15 M (50 FT.).

CHOKE CONTROL

"COLD START"

POSITION

(CHOKE CLOSED)

CHOKE CONTROL

"RUN"

POSITION

(CHOKE OPEN)

DO NOT USE

BLADES. STRING

LINE ONLY

BEWARE

-  THROWN,

RICOCHET

OBJECTS

PERSONAL

 

CONDITION

 

AND

 

SAFETY

 

EQUIPMENT

WARNING   

   DANGER

Trimmer/Brush Cutter users risk injury to themselves and others if the trimmer/brush cutter is used improperly and or
safety precautions are not followed.  Proper clothing and safety gear must be worn when operating a trimmer.

Содержание GT-25l





























Отзывы: