Echo CS-361P, Руководство оператора

Страница: 46 / 60

MAINTENANCE CS-361P
46 X7503323307
© 03/22 ECHO Incorporated
Oil Filter
• Check periodically.
• Do not allow dust to enter into oil
tank.
• A clogged oil filter (A) will affect
the normal lubricating system.
1. Pull oil filter (A) out through oil
port, and inspect oil filter.
2. If the oil filter (A) is dirty, wash it
in gasoline or replace it as
follows:
3. Do not remove the wire coil clamp to remove the oil filter (A). Pinch the
oil filter with the fingers on one hand and the line with the other hand.
Pull and twist slightly to separate.
4. Install the new or cleaned oil filter (A) with the reverse action.
5. When the inside of the tank gets dirty, rinse the tank out with gasoline to
clean it.
Guide Bar
1. Clean before using.
2. Clean the groove (A) of the
guide bar with a small
screwdriver.
3. Clean oil holes (B) with a wire.
4. Invert guide bar periodically.
5. Clean the bar mount area
before installing of the bar.
Sprocket
• A damaged sprocket will cause
premature damage or wear of saw
chain.
• When the sprocket has worn
0.5 mm (0.020 in.) or more, replace
it.
• Check sprocket when you install
new chain. Replace it if worn.
A
A
B
Worn: 0.5 mm (0.020 in.)