background image

CS-3410

OPERATION

X7503361801

31

© 10/23 ECHO Incorporated

Moving parts can amputate fingers or cause severe injuries. 
Keep hands, clothing and loose objects away from all openings. 
Always stop engine, disconnect spark plug, and make sure all 
moving parts have come to a complete stop before removing 
obstructions, clearing debris, or servicing unit.

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a 
poison gas. Breathing CO can cause unconsciousness, serious 
injury, or death. Exhaust can cause serious burns. ALWAYS 
position unit so that exhaust is directed away from your face 
and body.

Operation of this equipment may create sparks that can start 
fires around dry vegetation. This unit is equipped with a spark 
arrester to prevent discharge of hot particles from the engine. 
Metal cutters can also create sparks if the cutter strikes rocks, 
metal, or other hard objects. Contact local fire authorities for 
laws or regulations regarding fire prevention requirements.

Winter Operation

Air cleaner cover - Use the winter 

plug (A) to prevent carburetor trouble 

in winter.

• Remove air cleaner cover. Remove 

winter plug (A) from warm weather 

position (B), and install into cold 

weather position (C).

Note:  For operation at normal 

temperature (5°C [41°F]) 

return the plug to its 

original position. To 

prevent over heating of the 

engine.

A

B

C

Содержание CS-3410





























































Отзывы: