Echo CS-2511TES, Руководство по обслуживанию

Страница: 60 / 88

ENGINE
CS-2511TES
251Ts, 251TCs
58
8-2 Cleaning cooling air passages
1. Remove starter assembly (A) and fan cover (B).
2. Inspect starter assembly (A) and fan cover
(B) for blockage with dirt and/or saw dust. Clean
them with wooden or plastic stick or brush or com-
pressed air as required.
WARNING DANGER
Always wear eye protection when using
compressed air for cleaning. Otherwise,
eye damage can occur from flying particles.
3. Inspect cylinder cooling fins (C) for blockage
with dirt and/or saw dust (D). Clean them with
wooden or plastic stick or compressed air as re-
quired.
4. Remove ignition coil (E) if cylinder fins are hard
to clean. Inspect the clearance of cylinder fins and
the clearance between cylinder and engine cover.
Clean the clearance using wooden stick or plastic
stick or compressed air if dust is found.
5. Remove muffler cover, muffler, exhaust gasket
and exhaust plate from cylinder (Refer to “8-3 In-
specting muffler and exhaust port” ).
6. Inspect the clearance of cylinder fins and the
clearance between cylinder and engine cover.
Clean the clearance using wooden stick or plastic
stick or compressed air if dust is found.
E
D
C
D
A
B
STOP
STOP