SAFETY
CS-2511P
6
X7503333700
© 11/2020 ECHO Incorporated
1.
With a basic understanding of
kickback, you can reduce or
eliminate the element of
surprise. Sudden surprise
contributes to accidents.
2.
Keep a good firm grip on the
saw with both hands, the right
hand on the rear handle, and
the left hand on the front
handle, when the engine is
running. Use a firm grip with
thumbs and fingers encircling the chain saw handles. A firm grip will
help you reduce kickback and maintain control of the saw. Don’t let go.
3.
Make sure that the area in
which you are cutting is free
from obstructions. Do not let
the nose of the guide bar
contact a log, branch, or any
other obstruction which could
be hit while you are operating
the saw.
4.
Cut at high engine speeds.
5.
Do not overreach or cut above shoulder height.
6.
Follow manufacturer’s sharpening and maintenance instructions for the
saw chain.
7.
Only use replacement bars and chains specified by the manufacturer or
the equivalent.
Correct Use Of Chain Brake
Chain Brake Operation
• Set the lever in the unlocked position before starting to cut.
• If the brake is tripped by kickback
reaction, the chain will stop
immediately. Release the throttle
to avoid possible damage to the
engine or clutch.
• Do not attempt to operate the
engine with the brake locked.
Kickback Danger Zone
Linear kickback
Kickback
Pinch
Unlocked
