6
8 INCH CHIPPER
Section
2
ASSEMBLY
1. Remove chipper from shipping crate. Place unit on
a level surface before assembling. See the Torque
Chart in Section 7 for the recommended torque for
tightening bolts and screws.
2. Mount the chipper chute to the frame mounting
bracket using eight 3/8" × 1-1/2" bolts and locknuts.
Use three bolts on each side and two on the bottom.
3. For models with extension trays: Attach the extension
tray to the chute with five 3/8" × 1" bolts and nuts.
Figure 2.1, Attach Chute
If any bolts or nuts are dropped in the machine, be sure
to remove them before starting the machine.
WARNING
2.1 ATTACH CHUTE
Do not operate this unit without the chipper chute
correctly installed. Rotating cutting blades can cause
serious personal injury.
WARNING
CH8540XE MODEL SHOWN
