8
P
OWERING
ON
LED I
NDICATORS
Powering ON
The power switch is located under the debris cover.
Move the power switch to the ON position to energize
the DC output of the charging station and the periph
‐
eral wires.
NOTE:
When the power switch is in ON position, the
TEST LED will not illuminate.
Move the power switch to the OFF position to turn off
the DC output. Move the power switch to the TEST
position to energize the DC output of the charging sta
‐
tion and the peripheral wire(s).
NOTE:
When the power switch is in the TEST position,
the TEST LED will illuminate.
LED Indicators
Four LED indicators are located on the input panel on
the back side of the charger.
IMPORTANT:
If an LED is not illuminated, AC power
may still be present.
1 – Power switch
2 – Debris cover (cut
‐
away view shown)
3 – ON position
4 – OFF position
5 – TEST position
1
2
3
4
5
TEST LED
Illuminates green when AC
power is present and the
power switch is in the TEST
position.
SL (Station Loop) LED
Blinks green when the station
loop peripheral wire is
correctly connected, blinks
red when an issue is detected.
Z1 (Field Zone 1) LED
Blinks green when Field Zone
1 peripheral wire is correctly
connected, blinks red when
an issue is detected.
Z2 (Field Zone 2) LED
Blinks green when Field
Zone 2 peripheral wire is
correctly connected, blinks
red when an issue is detected.
1 – Input panel
2 – TEST LED
3 – SL (Station Loop) LED
4 – Z1 (Field Zone 1) LED
5 – Z2 (Field Zone 2) LED
2 3 4 5
1
1
