Ecco Axios, Руководство пользователя

Страница: 23 / 40

23 ENGLISH
Apply power to the lightbar and use the power button on
the keypad to turn on the beacons. Use the SEL and power
buttons to set flash pattern presets. Pressing both alley light
buttons simultaneously for two seconds will switch the beacon
mode between “flash” and “rotate” modes. See flash pattern
chart on page 15.
To secure the beacon in the
power rail, turn both locking
knobs clockwise a half
turn. Install any additional
modules, and replace the
lens.
3 4
CERTIFICATIONS
The image above depicts the minimum required configuration to meet SAE J845 Class 1 and ECE
R65. The location of the beacon modules directly affects compliance with industry standards and
regulations. They must be mounted in approved locations.
M
O
D
EL
E
Z1
40
2A
1
2-
24
V
D
C
9
08
-0
08
0-0
2 M
D
EX
X
XX
X
1/2
10R XX XXXX
M
O
D
EL
E
Z1
40
2A
1
2-
24
V
D
C
9
08
-0
08
0-0
2 M
D
EX
X
XX
X
1/2
10R XX XXXX
FRONT
ASSEMBLY &
CONFIGURATION
Beacon
Module Installation