Ecco Axios, Руководство пользователя

Страница: 19 / 40

19 ENGLISH
Installing the Lens
Ensure the lens latches are in the open position. Install one of the end lenses, making
sure the lens edge and retaining clips are seated properly. Turn the lens latch 90°
clockwise to secure.
Install the mid-section lenses, making sure this lens is completely within the slot on the
end lens. For four-piece lenses, install the center baffle and the second mid-section lens
in the same manner.
Install the other end lens, making sure the lens edge and clips are seated properly. The
mid-section lens must be seated in the slot on the end lens.
Apply gentle downward pressure at each joint to ensure lenses are properly seated in
the chassis.
Turn the lens latch 90° clockwise to secure.
MAINTENANCE
Occasional cleaning of the lenses will ensure optimum light output. Take care when cleaning lenses
– although tough, polycarbonate can scratch. Clean the lens and base with soap and water or a lens
polish using a soft cloth. Do not use solvents as they may damage the polycarbonate. Do not subject
the lightbar to high-pressure washers or automatic car washers.
1
2
3
4
5
ASSEMBLY &
CONFIGURATION
Lenses