3.
Watch the
installation video
.
Refer to proper camera installation
guidelines
here
.
2.
Scan the QR code inside the box
for a detailed installation video, spec
sheet and user guide.
5.
Remove backing. Press evenly
to ensure the mounting bracket’s
adhesive is flush against the glass.
Hold to window for 30 seconds.
8.
At the end of the bracket cable (A),
connect the terminal to the smaller
end of the adapter cable (F).
6.
Remove adhesive and apply cable
clips to windshield. Slide the bracket
power cable into clips.
7.
Tuck cable behind weather stripping,
and push stripping in to secure it.
Proceed to next page for
device calibration
>
12.
Open the KP2 installation app, and
scan the IMEI code on the box’s label.
10.
Turn on your vehicle. Check
that both blue and green lights
remain on after 5 minutes. If not,
an error occurred.
13.
Follow the device configuration
prompts to complete the installation
app.
1.
Review the package contents.
Standard Kit (w/Optional OBDII Data Adapter Cable)
A.
B.
C.
9.
Plug the end of the OBDII adapter
cable into your vehicle’s OBDII port.
11.
Scan the QR code above, and
download the iOS or Android KP2
installation app.
4.
Use wipe to clean the window.
Allow time to dry. To determine
compliant device placement,
check local regulations.
D.
E.
F.
A. KP2 Camera, Mounting
Bracket and Attached
Bracket Power Cable
B. 3M
™
Adhesive Tape
C. Alcohol Pads
D. Clips
E. Torx
®
Wrench
F.
Optional:
OBDII
Data Adapter Cable
(Connects to A) -
Sold Separately
Use the appropriate QR code to
download the KP2 Installation App.
FOR KP2 VIDEO TELEMATICS CAMERA
QUICK START INSTALLATION GUIDE
