EC-PACK EC-JET 1000Pro Скачать руководство пользователя страница 56

Страница: 56 / 120

Guangzhou EC-PACK Packaging Equipment Co., Ltd.

EC-JET 1000Pro Continuous Inkjet Printer

The jet must be stopped to set up this option. Select the appropriate conduit length for the print head

fitted by using the left or right arrow keys.

6.2.4

Head Height

The jet must be stopped to set up this option. Pressure varies by 5 units for every metre above and

below the printer. You may change the value between -9.5 and +9.5 metres, however, print heads are

currently a maximum of 6 metres in length, so the maximum value here should be 6.0. Simply specify, in

terms of half or whole meters, how far above or below the printer the print head is mounted. For

practical purposes, the measurement should be made from the space bar of the keyboard to the print

head nozzle assembly. If the print head is mounted below the printer, the value should be inputting the

following format - X.Xm. If the print head is mounted above the printer it is not necessary to place + in

front of the value. The value may be entered simply as - X.Xm.

NOTE:

Care must be exercised with this option; poor printer performance will result if incorrectly set.

This will automatically change the pressure reference from which the Solvent Add values

calculated and shown on the MONITOR JET menu.

6.2.5

Meter Counter

After turning on the meter counter, you can use the meter counter function in the data editing module.

6.3

Changing System Set Up

6.3.1

Print Head Code

This can only be entered if the jet is stopped. It will also need re-entering if a PCB or software is replaced.

To be used when a new print head has been fitted to the printer and/or when a reset to default has

occurred. The 14 digits are encoded as follows:

Head Type

0=Micro

1=Midi

2=Macro

Pressure Reference

0 through 255

Velocity of Drop Reference

(VOD)

Charge DAC

Gian

Normally 1000

Check Digit Modulo 10
checksum to ensure
code is entered
correctly

EJ68

6.3.2

Ref. Modulation

Displays the current Reference Modulation. A new reference value may be added with a User

Level 2 password

Содержание EC-JET 1000Pro

























































































































Результаты поиска

Содержание EC-JET 1000Pro

Отзывы:

EC-PACK EC-JET 1000Pro, Руководство пользователя, Страница: 56 / 120

Результаты поиска

Содержание EC-JET 1000Pro

Отзывы: