Chengdu Ebyte Electronic Technology Co.,Ltd.
ME31-XAAX0440_UserManul_EN
Copyright ©2012–2021,Chengdu Ebyte Electronic Technology Co.,Ltd.
25
5.2 Parameter configuration
Step 1: Connect the device refer to "Acquisition and Control"
Step 2: Select advanced configuration, you can configure device information, baud rate parameters, and Ethernet
parameters
Step 3: Configure module parameters and Modbus address (if you don’t need to configure, you can skip this step)
Device name: Configure the device name to distinguish the device, and support a maximum of 15 Bit;
Offset address: Modbus address of the device, effective immediately;
Reading parameters: You need to read the parameters once before configuring the parameters, otherwise it cannot be
configured;
Save parameters: save the parameters in the current input box;
Restart module: the device restarts after clicking;
Restore factory parameters: click to restore factory parameters immediately;
Step 3: Configure the module baud rate parameters, you need to read the parameters before configuration (if you don’t
need configuration, you can skip this step)
Step 4: Configure Ethernet parameters, you need to read the parameters before configuration (if you don’t need
configuration, you can skip this step)
Step 5: Select the basic parameters to configure, you can configure the DO working mode of the device
