Ebyte E95-DTU 433C 485-V2 Series, Руководство пользователя

Страница: 24 / 28

Chengdu Ebyte Electronic Technology Co.,Ltd. E95-DTU(433Cxx-485)-V2.0 User manual
Copyright ©2012–2023
，Chengdu Ebyte Electronic Technology Co.,Ltd. 24
Transmission
method
Transparent transmission, what you send is what you get. Fixed point: Send data at a
fixed point according to the format.
Note: 1. In the configuration of the upper computer, the radio address, frequency channel, network ID, and
key are in decimal display mode; where each parameter takes a range of values:
network address：0～65535
frequency channel：0～83
Network ID：0～255
Key:0～65535
2. Users in the use of the host computer configuration relay mode, you need to pay special attention
to, due to the host computer, the parameters for the decimal display mode, so the radio address and network ID
fill in the need to convert the conversion; such as transmitter A input network ID for 02, the receiver B input
network ID for 10, then the relay terminal R to set the radio address, will be converted from hexadecimal value
0X020A to decimal value 522 as the relay terminal R to fill in the radio address; that is, at this time the relay
terminal R need to fill in the radio address value of 522. When the relay R sets the radio address, the hexadecimal
value 0X020A will be converted to the decimal value 522 as the radio address filled in by the relay R; i.e., at
this time, the radio address value to be filled in by the relay R is 522.
7.3 Firmware Upgrade

E610-DTU supports serial port firmware upgrade, when special after-sales support is needed, you can contact
us to get the corresponding firmware for upgrade processing.
 Use USB to RS485 or RS232 tool to connect the corresponding port of the radio.