Ebyte E95-DTU 433C 485-V2 Series, Руководство пользователя

Страница: 20 / 28

Chengdu Ebyte Electronic Technology Co.,Ltd. E95-DTU(433Cxx-485)-V2.0 User manual
Copyright ©2012–2023
，Chengdu Ebyte Electronic Technology Co.,Ltd. 20
Format
E95-DTU(433C20-485)-V2.0 433MHz 0x0000 0x2E 0.5kbps 9600 8N1 20dbm
E95-DTU(433C30-485)-V2.0 433MHz 0x0000 0x2E 0.5kbps 9600 8N1 30dbm
Ⅵ Relay Networking Mode Usage
Seria
l
numbe
r
Description of relay mode
1
After setting the relay mode through the configuration mode, switch to the general mode and the
relay starts working.
2
In relay mode ADDH and ADDL are no longer used as radio addresses, but correspond to NETID forwarding
pairing respectively, and if one of the networks is received, it is forwarded to the other network;
the repeater's own network ID is invalid.
3 In relay mode, the relay radio cannot send and receive data for low-power operation.
4
Entering from mode 3 (sleep mode) or during a reset, the radio resets the user parameters, during
which the AUX output goes low.
Relay networking rule description:
1、forwarding rules, relay can forward data in both directions between two NETIDs.
2、In relay mode, ADDH\ADDL is no longer used as a radio address and is forwarded as a NETID pair.
As shown:
1
First class relay
"Node 1" NETID is 08.
"Node 2" NETID is 33.
The ADDH\ADDL of relay 1 is 08, 33 respectively.
So the signal sent by node 1 (08) can be forwarded to node 2 (33)