Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-ZG120A User Manual
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
1
（
2
）
For example, if the coordinator is the sender, click "enter configuration mode" to enter the fixed-point networking, select the
multicast mode, and the message box will prompt "under multicast mode, all nodes with the same group number in the network will
receive multicast data", modify the target group number to "5", and then write the parameter, and the message box will prompt "write
the parameter successfully".
（
3
）
Enter the transmission mode, the message box will prompt "enter the transmission mode successfully", and then carry out
multicast data communication.
（
4
）
The end-device receiver enters the configuration mode, changes the network group number to "4", and writes the parameter.
At this time, because the network group number is not "5", the coordinator multicast data cannot be received.
